E-mail: newsales12@vip.163.com
Tel: +86-15829050512
Contact Us

Address: Unit3.Building1, No.3 Courtyard, Pailou Alley Dongguan South Street, Beilin Distrct, Xi'an, Shaanxi, China

Tel: +86-15829050512

Fax: +86-029-82490435

E-mail:newsales12@vip.163.com

Home > Knowledge > Content

Chemical Industrial Sewage Electromagnetic Flow Meter

Basic Info.

Model NO.:A+E 81FAccuracy:±0.6-1%
Main Application:Water, Wastewater, Corrosive Liquid/GasSize:Dn 15-800
Sensor:Tube/FlangeApplication:Industrial Production
Type:Electromagnetic Flow MeterMeasuring Media:Liquid
Measuring Principle:Electrical PrinciplesMeasurement Object:Closed Pipeline
Certification:SGS, ISOPackage:Wooden Case, Carboard Box
Trademark:AEADOrigin:Shanghai
Velocity Range:0.2~8m/SElectrode:316L, Hc, Hb, Ti, Ta
Output:4-20mA DC, Pulse, RS485Pressure:Max.16 MPa
Media Temperature:Max 180 C (356 F)Ambient Temperature:Sensor 80 C(176 F), Converter 50 C(120 F)
Power Supply:220VAC or 24VDCConsumption:<8W
Grounding:Made Into The Third ElectrodeHS Code:9026100000

Product Description

Chemical Industrial Sewage Electromagnetic Flow Meter (A+E 81F)

 Highlights--Large choice of liner materials suitable for drinking water, wastewater, chemicals and other liquids.--Suitable for use in custody transfer applications.--Measurement is independent of the flow profile.--Abrasion and corrosion-resistant liners available.--Electric conductivity of medium can be used for detection of product change.--No additional pressure loss.--No moveable parts and long working life.--Two-way measurement system to detect the positive and negative flow.
--Site digital LCD displays instantaneous flow, accumulative flow, flow rate. 
--Various types provided according to specific conditions.--Change the grounding as the third electrode. Applications--water and sewage treatment--industrial chemical fluids--viscous fluids--slurries--process flow control Parameters

Itemsewage flow meter
Applicable pipe sizeDN 15-800 (1/2'' to 31-1/2'')
Applicable medialiquid with conductivity > 5 uS / cm
Velocity range0.2~8 m/s (0.66 to 26.2 ft/s)
Accuracy0.5%FS, 1.0%FS 
Process connectionflange, ANSI / GB / JIS, 1.0MPa, 1.6MPa, 4.0MPa, 16MPa optional
Processing temperature-20 to 150&#176;C, according to lining material
Ambient condition-40 to 80&#176;C, relative humidity <95%
Power supplyAC220V, 50Hz / DC24V / battery
Displaybacklight LCD
Operation4 light touch buttons
Signal output4-20mA, loading resistance 750&#937;,
pulse, 0-3kHz, 5V,
RS485
Consumption<8W
Cable inlet/outletM20*1.5
Protectiontransducer IP68, converter IP65
Tube materialcarbon steel, stainless steel optional
Lining materialPTFE, rubber, polyurethane, F46, Fs optional
Electrode materialstainless steel, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum optional
Groundingmade into a third electrode, same material with electrode
Industrieschemical, environmental, metallurgical, pharmaceutical, papermaking, water supply and drainage, etc.

 

Main performances of the lining materials
Lining materialMain PerformanceApplications
Teflon1.The most steady material in plastics which is resistible to boiling hydrochloric acid, vitriol fortis as well as strong alkali and organic impregnates.       
2.Not be perfect in abrasion resistance.
Strong corrosive mediums such as strong acid and alkali
F461.Have the same abrasion resistance with PTFE.
2.Resistable for low abrasion.
3.Having strong resistance to load pressure.
1.The same as PTFE.
2.Applicable in mediums of low abrasion.
Neoprene1.Be of good elasticity, retractility and abrasion resistance.
2.Be resistant to low acid, alkali and salt but not for oxidation mediums.
Water, sewage and slurry, mineral serosity of low abrasion.
Polyurethane1.Be of good abrasion resistibility.
2.Not be perfect in acid/alkali resistance.
3.Can't be used for water mixed with organic impregnants.
Applicable in mineral serosity, slurry and coal slurry of high abrasion.

 

Main performances of the electrode materials
Electrode material  Applications
Stainless steel SS316Applicable in water, sewage and corrosive mediums. Widely used in industries of petrol, chemistry, carbamide, etc.
Hastelloy B(HB)Having strong resistance to hydrochloric acid of any consistence which is below boiling point. Also resistible against vitriol, phosphate, hydrofluoricacid,organic acid etc which are oxidable acid, alkali and non-oxidable salt.
Hastelloy C(HC)Be resistant to oxidable acid such as nitric acid, mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water
TitaniumApplicable in seawater, and kinds of chloride, hypochlorite salt, oxidable acid (including fuming nitric acid), organic acid, alkali etc. Not resistant to a pure reducing acid(such as sulphuric acid, hydrochloric acid)corrosion. But if acid contains antioxidant(such as Fe+++,Cu++) is greatly reduce corrosion.
TantalumHaving strong resistance to corrosive mediums that is similar with glass. Almost applicable in all chemical mediums. Except for hydrofluoric acid, oleum and alkali.
Platinum-iridiumAlmost be applicable in all chemical mediums except for aqua fortis, ammonium salt.