E-mail: newsales12@vip.163.com
Tel: +86-15829050512
Contact Us

Address: Unit3.Building1, No.3 Courtyard, Pailou Alley Dongguan South Street, Beilin Distrct, Xi'an, Shaanxi, China

Tel: +86-15829050512

Fax: +86-029-82490435


Home > Knowledge > Content

Industrial Liquids Electromagnetic Flowmeter China Manufaturer

Basic Info.

Model NO.: 88700  8732E 8705Accuracy:±0.6-1%
Main Application:Water, Wastewater, Corrosive Liquid/GasSize:Dn 15-800 (1/2" to 31-1/2")
Sensor:Tube/FlangeApplication:Enviromental, Industrial
Type:Electromagnetic Flow MeterMeasuring Media:Liquid
Measuring Principle:Electrical PrinciplesMeasurement Object:Closed Pipeline
Certification:CE, SGS, ISOPackage:Carboard Box, Wooden Case
Item: Magnetic  FlowmeterVelocity Range:0.2~8 M/S (0.66 to 26.26 Ft/S)
Electrode:316L, Hc, Hb, Ti, TaOutput:4-20mA DC, Pulse, RS485
Pressure Range:0~16 MPaMedia Temperature:Max 150 C
Ambient Temperature:Sensor 80 C, Converter 50 CPower Supply:220VAC or 24VDC
Grounding:Made Into Third ElectrodeLining Material:F4, PTFE, F46, Fs, Rubber
HS Code:9026100000

Product Description

Applicable pipe sizeDN 15-800 (1/2'' to 31-1/2'')
Applicable medialiquid with conductivity > 5 uS / cm
Accuracy0.5%FS, 1.0%FS 
Process connectionflange, ANSI / GB / JIS, 1.0MPa, 1.6MPa, 4.0MPa, 16MPa optional
Processing temperature-20 to 150°C, according to lining material
Ambient condition-40 to 80&#176;C, relative humidity <95%
Power supplyAC220V, 50Hz / DC24V / battery
Displaybacklight LCD
Operation4 light touch buttons
Signal output4-20mA, loading resistance 750&#937;,
pulse, 0-3kHz, 5V,
Cable inlet/outletM20*1.5
Protectiontransducer IP68, converter IP65
Tube materialcarbon steel, stainless steel optional
Lining materialPTFE, rubber, polyurethane, F46, Fs optional
Electrode materialstainless steel, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum optional
Groundingmade into a third electrode, same material with electrode
Industrieschemical, environmental, metallurgical, pharmaceutical, papermaking, water supply and drainage, etc.

Main performances of the lining materials

Lining materialMain PerformanceApplications
Teflon1.The most steady material in plastics which is resistible to boiling hydrochloric acid, vitriol fortis as well as strong alkali and organic impregnates.       
2.Not be perfect in abrasion resistance.
Strong corrosive mediums such as strong acid and alkali
F461.Have the same abrasion resistance with PTFE.
2.Resistable for low abrasion.
3.Having strong resistance to load pressure.
1.The same as PTFE.
2.Applicable in mediums of low abrasion.
Neoprene1.Be of good elasticity, retractility and abrasion resistance.
2.Be resistant to low acid, alkali and salt but not for oxidation mediums.
Water, sewage and slurry, mineral serosity of low abrasion.
Polyurethane1.Be of good abrasion resistibility.
2.Not be perfect in acid/alkali resistance.
3.Can't be used for water mixed with organic impregnants.
Applicable in mineral serosity, slurry and coal slurry of high abrasion.

Send inquiry to this company :

Xi’an  Xinyuan Industrial Equipment Co.,Ltd

Web  :www.xyindustrial-instrument.com

Phone:+86-15829050512 | Skype Dasiy65    Yahoo :lidasiy