E-mail: newsales12@vip.163.com
Tel: +86-15829050512
Contact Us

Address: Unit3.Building1, No.3 Courtyard, Pailou Alley Dongguan South Street, Beilin Distrct, Xi'an, Shaanxi, China

Tel: +86-15829050512

Fax: +86-029-82490435

E-mail:newsales12@vip.163.com

Home > Knowledge > Content

Rosemount 8800C Vortex Flowmeter

Rosemount 8800D Vortex Flowmeter

Rosemount Reliability -The 8800D Vortex eliminates impulse lines, ports, and gaskets to improve reliability.

• Non-clog Design - Unique gasket-free construction which has no ports that can clog.


• Vibration Immunity - Mass Balancing of the sensor system, and Patented Adaptive Digital Signal Processing (ADSP) provide Vibration immunity.

• Replaceable Sensor - The sensor is isolated from the process and can be replaced without breaking the process seals. All line sizes use the same sensor design allowing a single spare to serve every meter.

• Simplified Troubleshooting - Device Diagnostics enable field verification of Meter Electronics and Sensor with no process shutdown

 

 

The 8800D is available in wafer style meterbodies for 1/2 through 8 inch line sizes, and ASME B16.5 (ANSI), DIN, or JIS flanged style meter bodies for 1/2 through 12 inch line sizes.
• Alignment rings, provided with each wafer-style flowmeter, ensure that the meter body is properly centered with the adjacent    piping.


• Both wafer and flanged style meter bodies are available in 316L stainless steel and Nickel Alloy materials of construction.  

• Available up to ANSI class 1500 for 1 through 8 inch (25 mm through 200 mm) and ANSI class 900 for 1/2 inch (15 mm) through 8 inches(200 mm).

 

Analog Output Adjustment
Engineering units and lower and upper range values are user-selected. Output is automatically scaled to provide 4 mA at the selected lower range value, 20 mA at the selected upper range
value. No frequency input is required to adjust the range values.

Scalable Frequency Adjustment

Value of one pulse can be set to equal desired volume in selected engineering units.

Ambient Temperature Limits

Operating

–58 to 185 °F (–50 to 85 °C)

–4 to 185 °F (–20 to 85 °C) for flowmeters with local indicator

Storage

–58 to 250 °F (–50 to 121 °C)

–50 to 185 °F (–46 to 85 °C) for flowmeters with local indicator

Pressure Limits

Flange Style Meter

Rated for ASME B16.5 (ANSI) Class 150, 300, 600, 900, and 1500, DIN PN 10, 16, 25, 40, 64, 100, and 160, and JIS 10K, 20K, and 40K

Reducer Style Meter

Rated for ASME B16.5 (ANSI) Class 150, 300, 600, and 900, DIN PN 10, 16, 25, 40, 64, 100, and 160.

Dual Sensor Style Meter

Rated for ASME B16.5 (ANSI) Class 150, 300, 600, 900, and 1500, DIN PN 10, 16, 25, 40, 64, 100, and 160, and JIS 10K, 20K, and 40K

Wafer Style Meter

Rated for ASME B16.5 (ANSI) Class 150, 300, and 600, DIN PN 10, 16, 25, 40, 64, and 100, and JIS 10K, 20K, and 40K