E-mail: newsales12@vip.163.com
Tel: +86-15829050512

Rosemount 3051TA Pressure Transmitter

Rosemount 3051TG 3051TA Pressure Transmitter
Unit price : 500-1200USD
Min Order : 1 piece
Payment Terms:L/C, T/T, Western Union .
Delivery time : 2-3weeks
Transmitter Specifications: Output: Two-wire 4-20 mA, user-selectable for linear or square root output. Digital process variable...

Send Inquiry
Rosemount 3051TA Pressure Transmitter

Type :Rosemount 3051TG 3051TA Pressure Transmitter

Unit price : 500-1200USD       Min Order : 1 piece 

Payment Terms:L/C, T/T, Western Union .

Delivery time : 2-3weeks 


Transmitter Specifications:


Output:

Two-wire 4-20 mA, user-selectable for linear or square root output.Digital process variable superimposed 

on 4-20 mA signal,available to any host that conforms to the HART protocol.


Reference Accuracy :

±0.065% of span

±0.075% of span For spans less than 10:1,


Stability

±0.10% of URL for 12 months


Solating Diaphragms:

316L SST or Alloy C-276


Power Supply :

External power supply required. Standard transmitter (4-20 mA) operates on 10.5 to 55 V dc 

with no load.


Basic Information :

Rosemount 3051T In-line Pressure transmitters provide reliable Gage andAbsolute pressure measurement in 

a compact in-line design. Select from the following capabilities for seamless integration:

• Performance up to 0.04% accuracy

• Manifolds and Seal Solutions

• 4-20 mA HART, 1-5 Vdc HART low power, FOUNDATION fieldbus, and Profibus PA protocols

• Calibrated spans/ranges from 0.3 to 10,000 psi (10,3 mbar to 689 bar)

• 316 SST and Alloy C-276 process isolators



3051T Dimensional Drawings :

3051TG.jpg


Products photos :







Daily maintenance

Choose the right location: when the pressure sensor's installation position is too close to the production line, the unmelted 

material may wear down the top of the sensor.If after the location of the sensors are installed in, between the sensor and

 the screw stroke may produce the stagnation of the molten material area, there is likely to produce degradation, melting

pressure signal may also transfer distortion;If the sensor is too deep into the cylinder, the screw may touch the top of the

 sensor during the rotation and cause damage.In general, the sensor can be located in the front of the tube, the front and

back of the melt pump or in the mold.




Why chose us :




Leave Message
Your privacy is important to us - we never sell or share your information.