E-mail: newsales12@vip.163.com
Tel: +86-15829050512

EJA118Y Diaphragm Sealed Differential Pressure Transmitter-Yokogawa

EJA118Y Diaphragm Sealed Differential Pressure Transmitter-Yokogawa
Unit price : 780-1500USD
Min Order : 1 piece
Payment Terms:L/C, T/T, Western Union .
Delivery time : 2-3weeks
Technical specification : EJA118Y :Diaphragm sealed differential pressure transmitter (Combination of extended...

Send Inquiry
EJA118Y Diaphragm Sealed Differential Pressure Transmitter-Yokogawa

EJA118Y  Diaphragm Sealed Differential Pressure Transmitter-Yokogawa


Unit price : 780-1500USD       Min Order : 1 piece 

Payment Terms:L/C, T/T, Western Union .

Delivery time : 2-3weeks 


Technical specification :

EJA118Y :Diaphragm sealed differential pressure transmitter

                 (Combination of extended diaphragm and flush diaphragm type)


Output Signal:

4 to 20 mA DC with digital communication (BRAIN protocol)

4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00EN)


Measurement span(capsule) :

2.5 to 100 kPa {250 to 10000 mmH2O}{10 to 400 inH2O}{25 to 1000 mbar}

25 to 500 kPa {0.25 to 5 kgf/cm2}{100 to 2000 inH2O}{250 to 5000 mbar}


High pressure side (extended diaphragmtype) wetted parts material :

[Diaphragm]                          [Pipe]                             [Others]

JIS SUS316L                          JIS SUS316                      JIS SUS316 *3



Diaphragm extension length (X2) :

X2 = 50 mm

X2 = 100 mm

X2 = 150 mm



Cover flange bolts materia:

JIS SCM435         JIS SUS630


Capillary length (m) :

Specify capillary length from 1 to 10 m in  . (Example for 2 m : 02)


Installation:

Horizontal impulse piping type, left side high pressure


Mounting bracket:

JIS SECC     2-inch pipe mounting (flat type)

JIS SUS304   2-inch pipe mounting (flat type)

JIS SUS316   2-inch pipe mounting (flat type)


Basic information :

Diaphragm seals are used to prevent process medium form entering directly into the pressure-sensing

assembly of the differential pressure transmitter, 

Please read the product samples and instructions carefully before installing the pressure transmitter, 

and the pressure interface should not leak during installation to ensure that the range and wiring are

correct.The shell of the pressure sensor and the transmitter should be grounded normally. The signal 

cable shall not be mixed with the power cable, and the sensor and transmitter should avoid strong 

electromagnetic interference.


It is possible to avoid direct contact with the diaphragm of the transmitter. 

This method can be applied to the followsituations:

1. The tested medium has the corrosive effect on the transmitter sensor

2. It is necessary to isolate the high temperature measurement medium from the transmitter

3. Solid suspended or high viscosity medium in the measured medium

4. The measured medium is easily solidified or crystallized by the primer tube

5. The measuring head should be strictly purified by changing the measured medium

6. The measuring head must be hygienic and strictly prohibited from pollution.Use object: corrosive or viscous liquid







Dimensional Drawings:



Products photos :

EJA438(2).jpg



   

Why chose us :

why.jpg

Transportation.jpg


Hot Tags: eja118y diaphragm sealed differential pressure transmitter-yokogawa, China, manufacturer, supplier, wholesale, discount, buyer, high quality, high accuracy, ex work price, hot sale, best price
Leave Message
Your privacy is important to us - we never sell or share your information.